One Pair (2) of Wheel Spacers – 8x6.5” (8x165.1mm) Bolt Pattern, 1.5 Inch Thick 9/16” Studs Dodge Ram Ford F-250 F-350 Chevy GMC C20, K20 [5284-A22] by 50 Caliber Racing at Wheelers for the Wounded. MPN: [5284-A22]. Hurry! Limited time offer. Offer valid only while supplies last. One Pair (2) of Wheel Spacers - 8 x 6.5'' - 1.5'' Thick - 9/16'' Studs - 50 Caliber Racing CNC milled using high quality aerospace aluminum for
Product Description & Reviews
One Pair (2) of Wheel Spacers - 8 x 6.5" - 1.5" Thick - 9/16" Studs - 50 Caliber Racing
CNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes tapered lug nuts to mount to your wheel. Available in several bolt patterns to fit virtually every car or truck ever made.
CHEVROLET / GMC / HUMMER:
3/4 Ton C20 Pickup, Suburban, Van (All years until 1987 - non dually)
1 Ton C30 Pickup, Suburban, Van (All years until 1987 - non dually)
2500 & 3500 Trucks & Vans - non dually (All years until 2010)
Avalanche 2500 (02-08)
Suburban K2500 (All years until 2010)
Yukon XL 2500 (All years until 2010)
H1 civilian (All), H2 (All)
GMC/Chevy Specific NOTE: These spacers have 9/16" studs. Many 1988-up GM models use 14mm studs. Same bolt pattern but the lugs will not match. Make sure you check your lug/stud size and thread pitch before ordering!
Ram 3/4 ton Truck (all years)
F250 and F350 Trucks, E250 and E350 Vans (All years before 1998)
These spacers are lug centric and are not compatible with hub-centric wheels. Some vehicles above use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. Installation requires one set of open end tapered lug nuts to bolt the adapter to the vehicle. Most factory lug nuts are not compatible. These are NOT included and are sold separately. Be advised that you may need to modify your existing studs if they protrude past surface of spacers. Not for use with dually rear axles.
Features & Highlights
- One Pair (2) of Wheel Spacers - 6061 Billet Aluminum
- Bolt Pattern: 8 x 6.5" / 8 x 165.1mm - 1.5 Inch Thick - 9/16" Stud Size
- Hub Center Bore: 130mm - Outside Diameter: 202mm
- Lug Centric Design - Includes tapered lug nuts for mounting wheel to spacer
- Easy Installation - Lifetime Warranty - 50 Caliber Racing - Free USA shipping to Lower 48!
50 Caliber Racing
Wheels & Accessories
50 Caliber Racing
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by 50 Caliber Racing, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By East Lake Axle
This rear axle bearing carrier is an aftermarket replacement built to the specifications of the OEM bearing carrier. This bearing carrier comes with the new bearings, seals, spacers and O'rings where necessary.This rear axle bearing carrier works on...
By ATV Engineering
You are purchasing one set of 2 ATV wheel spacers, enough to widen one axle 4.00" total (one spacer in the kit for each wheel on the axle). The 4.00" ATV wheel spacers are 2.00" per side will fit most any ATV with a 4 x 110 wheel stud pattern. A wide...
By Max Motosports
mpn: WP205-403, ean: 0701948081570,
Compatibility 2003-2010 Can-Am/Bombardier Outlander 330 - 2WD/4WD Front & Rear 2003-2014 Can-Am/Bombardier Outlander 400 - 2WD/4WD Front & Rear 2007-2014 Can-Am/Bombardier Outlander 500 - 2WD/4WD Front & Rear 2006-2014 Can-Am/Bombardier Outlander 650...